Dialogue Tech NANO-PV-D510A User Manual download pdf (Page 67)

NANO-PV-D510A User Manual

Page 53

Step 6: Locate the connector. The location of the keyboard/mouse Y-cable connector

is shown in Chapter 3.

Step 7: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on

the NANO-PV-D510A keyboard/mouse connector. See

Figure 4-14.

Step 8: Insert the cable connectors. Once the cable connector is properly aligned with

the keyboard/mouse connector on the NANO-PV-D510A, connect the cable

connector to the on-board connectors. See

Figure 4-14.

Figure 4-14: Keyboard/mouse Y-cable Connection

Step 9: Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable

connector is connected to two PS/2 connectors. To secure the PS/2 connectors

to the chassis please refer to the installation instructions that came with the

chassis.

Step 10: Connect the keyboard and mouse. Once the PS/2 connectors are connected

to the chassis, a keyboard and mouse can each be connected to one of the

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 168 169

No comments

Dialogue Tech NANO-PV-D510A User Manual Page 67